KS20 K - The little giant of commercial building and light industry
Open side profile
An open side profile allows for internal mounting.
Fire class E90
KS20 K has been fire tested to class E90 when installed according to Meka’s installation instructions.
Climate stress class C1-C2
The cable ladder is made of hot-dip galvanized steel.
Meka’s KS20 K is a little giant in cable ladders for commercial building technology solutions for indoor and outdoor use when climate stress class C1 or C2 is sufficient. The ladder shelf is made of hot-dip galvanized steel.
An open side profile allows for internal mounting. KS20 K has been fire tested to class E90 when the span is max. 1.5 m and the load is max. 15 kg/m. KS20 K is compatible with KS20 and KS60 systems. The ladder shelf is suitable for use in places such as shopping centers, offices, schools, and educational institutions.
SSR PG compatible
The KS20 K system is compatible with the proven quick-install SSR PG extension. In the SSR PG extension, the screws are pre-attached, which speeds up the installer’s work.
Certified load testing results
How to Read Load Diagrams
1. Testing method compliant with IEC 61537 type 3.
2. Product deflection in millimetres.
3. Product load in kilograms per metre.
4. Span used in testing, in metres.
5. With a load of 70 kilograms per metre and a span is 2.5 metres, the product will deflect by 6 millimetres.
The safe workload (SWL) has been tested with a calibrated testing device. This testing method is certified according to the standard IEC 61537. The joint is at a 1/5 distance of the support and the deflection was measured at the midway point between the supports. SWL is a load that creates a deflection of 1/100 in the span, or if a 1/100 deflection is not achieved, it is the force that creates a permanent deformation divided with the safety factor, which is 1.7.
KS20 K load testing results
The loads and deflections measured with the certified test equipment for Meka’s KS20 K ladder shelf.